ASTM F205-1994(2005) 用称量法测定细金属丝直径的测试方法

作者:标准资料网 时间:2024-05-23 23:46:52   浏览:9836   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:StandardTestMethodforMeasuringDiameterofFineWirebyWeighing
【原文标准名称】:用称量法测定细金属丝直径的测试方法
【标准号】:ASTMF205-1994(2005)
【标准状态】:现行
【国别】:
【发布日期】:1994
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:F01.03
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:称重;金属线;电子工程;测量;直径
【英文主题词】:electronicdevices;finewire;wirebonding
【摘要】:1.1Thistestmethodcoversthemeasurementoftheaveragediameteroffinewirebyweighingaknownlength;itappliesparticularlytosizesupto0.13mm(0.005in.)usedinelectrondevicesandlamps.1.2ThevaluesstatedinSIunitsaretoberegardedasthestandard.Thevaluesgivenininch-poundunitsapplyonlyforthediameter.1.3Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:H60
【国际标准分类号】:29_060_10
【页数】:3P.;A4
【正文语种】:


下载地址: 点击此处下载
Product Code:SAE J1451
Title:A Dictionary of Terms for the Dynamics and Handling of Single Track Vehicles (Motorcycles, Mopeds, and Bicycles)
Issuing Committee:Motorcycle Technical Steering Committee
Scope:This dictionary of terms was prepared for use by those with a need to describe and understand the dynamics and handling of two-wheeled, single track vehicles. It is intended to span the gap between vehicle dynamics specialists and those with a more general interest.This report is pertinent to such areas as vehicle design and development, the description of two-wheeler properties, rider training and education, and the preparation of standards and regulations.This report was prepared by the SAE Motorcycle Committee, which solicits suggestions for improvements and additions to be considered in future revisions. Comments should be directed to SAE Headquarters.Product Code:SAE AMS5619
Title:Steel Bars and Forgings, Corrosion Resistant 14Cr - 4.0Mo (1.00 - 1.10C)
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:Primarily for parts requiring resistance to both corrosion and wear with hardness retained during exposure to temperatures up to 600 F (316 C).